My plan last night was to do a night sail back to Guernsey. It was the first opportunity to move for several days due to high winds and a sequence of storm fronts moving through the Channel.
I got as far as the outer harbour entrance in bumpy seas and noticed a line flying around over my head… that’s not a line, that’s the stern shroud (the wire running from the top of the mast to the back of the boat.. it holds the mast up π³).
Panic!!! No… stay calm… I quickly got the engine running, furled the headsail and dropped the mainsail and turned back to the harbour. On the way I figured out what went wrong. The shroud is attached to the boat via a thick clevis pin which should not be able to work loose due to a retaining pin. Both pins were missing. Fortunately I have spares.
I anchored outside the marina, did the repairs and went to bed.
I set off about 9.30am, conditions were good with at one point 7.5 knots of tide pushing the boat up to just over 11.5 knots.

I made good progress as far as Alderney but then wind dropped and tides were against me. Heading too far East I switched on the engine and motor sailed to Sark where I am anchored for the night.

Leave a Reply